Plastisols are liquid at room temperature and must be heated to approximately 350°F internally to reach their maximum physical properties. A versatile product, plastisols can be dip, cast, or rotation molded, and sprayed. Following are a few of the products manufactured from International Coatings plastisols:

Fishing LuresReplica Food

  • Formulas for salt and fresh water fishing. 
  • Durometer range of 15-95 shore-A.
  • Can be purchased in clear or in colors.
  • No plasticizer migration.

Replica Food

  • Formulated with F.D.A. raw materials.
  • All Durometer ranges.
  • Water based urethane coating for color hi-lites available.


  • Formlated with F.D.A. raw materials
  • Complete range of non hazardous pigments are used.
  • Durometer range, 30 shore-A to 40 shore-D

Filter end caps for air and liquid cartridges Filter

  • Durometer range 40 to 80 shore-A.
  • F.D.A formulas available.
  • Fomulated to be non-wicking on most medias.
  • NSF approval.

Medical devices manufacturing

  • Formulated with FDA raw materials.
  • All Durometer ranges.                                                                           
  • Certification documents for all products.

Hot dip and open molding manufacturing.

  • Formulas for coating tool handels, grips and caps.
  • All Durometer ranges.
  • All color selection.
  • No plasticizer migration.
  • FDA type formulas available
  • Foamable plastisol available.

Rotational molded products Wheel

  • Durometer range 30 shore-A to 40 shore-D
  • All color selection.
  • Products are formulated to insure smooth, even surfaces when molded.
  • FDA formulas available.
  • Primer available for metal inserts.